Vol. 7 No. S1 (2025): Trans. AMMM Supplement | Transactions on Additive Manufacturing Meets Medicine

Regulatory Challenges in Additive Manufacturing of Medical Devices

Regulatory considerations on physical anatomical models

Stefan Marschall; Alberto Di Benedetto, Folker Spitzenberger

DOI https://doi.org/10.18416/AMMM.2025.25062366

Regulatory Challenges in Additive Manufacturing of Medical Devices, 2366
The ISO/IEC 17025 accreditation journey for additive manufacturing in medical engineering

Franziska Seidensticker, Britta Pirnay-Duscher, Folker Spitzenberger, Maximilian Wattenberg, Alberto Di Benedetto, Thomas Friedrich

DOI https://doi.org/10.18416/AMMM.2025.25062091

Regulatory Challenges in Additive Manufacturing of Medical Devices, 2091

Critical-Sized Bone Defect Treatment

Medical Device Research & Innovation - Status Quo, Challenges & Opportunities to Drive Global Healthcare Innovation

Nils Reimers

DOI https://doi.org/10.18416/AMMM.2025.25062078

Critical-Sized Bone Defect Treatment, 2078
Patient-specfic tibia implants: Computational design and test processes for clinical cases

Birk Urmersbach, Julie Kühl, Andreas Seekamp, Jannek Grocholl; Sabine Fuchs

DOI https://doi.org/10.18416/AMMM.2025.25062083

Critical-Sized Bone Defect Treatment, 2083
A clinician-friendly patient-specific scaffold design suite for treating bone defects

Buddhi Herath, Kim MinJoo, Giles Cheers, Markus Laubach, Yooseok Chae, Sinduja Suresh, Christoph Thorwächter, Paul Reidler, Stefan Leonhardt, Arnaud Bruyas, Susanne Mayer-Wagner, Boris Holzapfel, Dietmar Hutmacher, Marie-Luise Wille

DOI https://doi.org/10.18416/AMMM.2025.25062075

Critical-Sized Bone Defect Treatment, 2075

Medical Aids and Devices

Hybrid manufacturing approach for multi-scale bio-inspired blood contacting membrane designs

Kai Barbian, Ulrich Steinseifer, Sebastian Jansen

DOI https://doi.org/10.18416/AMMM.2025.25062103

Medical Aids and Devices, 2103
3D printed coil array for spherical harmonic spatial encoding in magnetic particle imaging

Egor Kretov; Dennis Wendt, Matthias Graeser

DOI https://doi.org/10.18416/AMMM.2025.25062087

Medical Aids and Devices, 2087
A 3D-printed sensor adapter for liposuction cannulas for in-situ force sensing

Erik Westphal, Eric Schwarz, Hermann Seitz

DOI https://doi.org/10.18416/AMMM.2025.25062092

Medical Aids and Devices, 2092
Case study: Including 3D printing in prosthetic fabrication for young children

Johannes Karl-Christian Lippert, Gunar Liebau, Andreas Kohn; Christian Eschenburg

DOI https://doi.org/10.18416/AMMM.2025.25062060

Medical Aids and Devices, 2060

Imaging and Modelling in 3D Printing

Hydrogel-based MPI Phantoms

Eric Aderhold, Annika Dell, Pascal Stagge, André Behrends, Mandy Ahlborg, Thomas Friedrich, Dennis Kundrat, Thorsten Buzug

DOI https://doi.org/10.18416/AMMM.2025.25062085

Imaging and Modelling in 3D Printing, 2085
Transparent and flexible patient-specific aneurysm models for device testing

Harsha Prakasam Prabhakaran; Mariya Pravdivtseva, Jan - Bernd Hovernor, Olav Jansen, Raman Bedi, Naomi Larsen, Faizan Ghauri

DOI https://doi.org/10.18416/AMMM.2025.25062418

Imaging and Modelling in 3D Printing, 2418

Scaffolds, Implants and Drug Delivery Systems

Sinter-joined bioceramics for hybrid bone implants

Sarah Nistler; Christoph Hofstetter, Stefan Baudis, Martin Schwentenwein, Jürgen Stampfl

DOI https://doi.org/10.18416/AMMM.2025.25062095

Scaffolds, Implants and Drug Delivery Systems, 2095
Marine biopolymers for DLP-bioprinting of vital bone constructs

Sabine Fuchs; Julie Kühl, Andreas Seekamp, Birk Urmersbach, Stanislav Gorb

DOI https://doi.org/10.18416/AMMM.2025.25062080

Scaffolds, Implants and Drug Delivery Systems, 2080
Development and characterization of a gradient scaffold for osteochondral defects

Phillip Barkow; Janine Waletzko-Hellwig, Nada Abroug, Christian Polley, Lisa Schöbel, Aldo Boccaccini, Rainer Bader, Hermann Seitz

DOI https://doi.org/10.18416/AMMM.2025.25062112

Scaffolds, Implants and Drug Delivery Systems, 2112
Engineering of a Polycaprolactone-Stabilized Alginate Hydrogel for 3D Bioprinting of Patient-Specific Implants enabling Sustained Local Dexamethasone Delivery in Inner Ear Therapy

Verena Scheper, Yanjing Luo, Thomas Lenarz, Gerrit Paasche, Jan Drexler, Gerald Dräger, Hongzheng Zhang, Jie Tang

DOI https://doi.org/10.18416/AMMM.2025.25062081

Scaffolds, Implants and Drug Delivery Systems, 2081
Dexamethasone and ciprofloxacin release and bio-efficacy after autoclavation of 3D printed external ear canal implants

Martina Knabel, Gerald Dräger, Thomas Lenarz, Verena Scheper

DOI https://doi.org/10.18416/AMMM.2025.25062101

Scaffolds, Implants and Drug Delivery Systems, 2101

Material Properties, Structural Designs, and Printing Technologies

Evaluation of tensile properties of 3D-printed aortic models

Annika C. Dell, María Magdalena R. Ruiz, Lea Peuckert, Franziska Seidensticker, Malte M. Sieren, Thorsten M. Buzug, Franz Wegner, Thomas Friedrich

DOI https://doi.org/10.18416/AMMM.2025.25062111

Material Properties, Structural Designs, and Printing Technologies, 2111
Biomechanical characterization of MEW-manufactured synthetic scaffold structures for tissue-engineered vascular grafts

Jana Krueger, Annika Baudisch, Sebastian Loewner, Kai Bernreuther, Mathias Wilhelmi, Cornelia Blume

DOI https://doi.org/10.18416/AMMM.2025.25062063

Material Properties, Structural Designs, and Printing Technologies, 2063
Printed highly bio-tolerant Ti/Nb/Ta alloys
Combination of elasticity and strength

Melanie Stenzel; Markus Weinmann, Nicole Kuek, Oliver Morgan

DOI https://doi.org/10.18416/AMMM.2025.25062165%20

Material Properties, Structural Designs, and Printing Technologies, 2165
Electropolishing of porous beta-Ti21S implant: balancing mechanics and biocompatibility

Melika Babaei; Lorena Emanuelli, Raffaele De Biasi, Eleonora Fadelli, Francesca Agostinacchio, Anton du Plessis, Antonella Motta, Michele Fedel, Matteo Benedetti, Massimo Pellizzari

DOI https://doi.org/10.18416/AMMM.2025.25062059

Material Properties, Structural Designs, and Printing Technologies, 2059
X-ray inspection and pore-classification in additive manufacturing: A systematic study on Al-alloys

Kevin Eickhoff, Rafael Meinhardt, Stefan Grottker, Frank Herold

DOI https://doi.org/10.18416/AMMM.2025.25062053%20

Material Properties, Structural Designs, and Printing Technologies, 2053
3D printing functionally graded structures with different cellular architecture

Shuya Tian, Sinduja Suresh, Marie-Luise Wille, Dietmar W Hutmacher

DOI https://doi.org/10.18416/AMMM.2024.24092074

Material Properties, Structural Designs, and Printing Technologies, 2074
Investigating inter-layer crosslinking of alginate-gelatine hydrogels to modify layer adhesion

André Behrends, Lea Evers, Annika Dell, Roman Leonov, Dennis Wendt, Thomas Friedrich, Thorsten Buzug

DOI https://doi.org/10.18416/AMMM.2025.25062109

Material Properties, Structural Designs, and Printing Technologies, 2109
Porous zinc structures using molten metal jetting additive manufacturing

Valeria Marin-Montealegre, Paarth Mehta, Ankit Rochani, Denis Cormier

DOI https://doi.org/10.18416/AMMM.2025.25062246

Material Properties, Structural Designs, and Printing Technologies, 2246
Construction of a test rig to quantify the cutting characteristics of additively manufactured phantom samples

Lea Peuckert, Franziska Seidensticker, Thomas Friedrich, Thorsten Buzug

DOI https://doi.org/10.18416/AMMM.2025.25062079

Material Properties, Structural Designs, and Printing Technologies, 2079
Development of an Oxygen-Sensitive Hydrogel for Monitoring Oxygen Diffusion in Tissue Engineering

Lisa Marie Ehlers; Lukas Rennpferdt, Hoc Khiem Trieu

DOI https://doi.org/10.18416/AMMM.2025.25062084

Material Properties, Structural Designs, and Printing Technologies, 2084
Mechanical properties and biocompatibility of bioresorbable ceramic bone implants printed by lithography-based manufacturing

Julie Kühl, Christian Polley, Birk Urmersbach, Stanislav Nicolai Gorb, Andreas Seekamp, Hermann Seitz, Sabine Fuchs

DOI https://doi.org/10.18416/AMMM.2025.25062158

Material Properties, Structural Designs, and Printing Technologies, 2158
Sterilization Effects on Dimensional Accuracy of 3D-Printed Carbon Fiber-Reinforced Nylon

Giles Michael Cheers, Abbey Goodwin, Andreas Heede, Jana Milite, Melissa Johnston, Anthony Morris, Marie-Luise Wille, Paige Little, Sinduja Suresh

DOI https://doi.org/10.18416/AMMM.2025.25062058

Material Properties, Structural Designs, and Printing Technologies, 2058
Advanced Hip Implants: Combining a novel metastable beta-Ti alloy and lattice structures to reduce stress shielding

Sofia Vignali, Raffaele De Biasi; Lorena Emanuelli; Melika Babaei, Anton du Plessis, Massimo Pellizzari, Matteo Benedetti

DOI https://doi.org/10.18416/AMMM.2025.25062082

Material Properties, Structural Designs, and Printing Technologies, 2082
Measurement setups and strategies for enhanced 3D printing of mesoscale optics for industrial applications

Fabian Henk, Gregor Knoll, Mathias Beyerlein, Kai Seger

DOI https://doi.org/10.18416/AMMM.2025.25062088

Material Properties, Structural Designs, and Printing Technologies, 2088

Printed Anatomy for Planning, Training, and Phantoms for Quality Assurance

Pressure profile measurements in cranial aneurysm models

Roman Leonov; Sonja Wichelmann, Hannes Schwenke, Annika Dell, André Behrends, Thorsten Buzug, Thomas Friedrich

DOI https://doi.org/10.18416/AMMM.2025.25062089

Printed Anatomy for Planning, Training, and Phantoms for Quality Assurance, 2089
3D-Printed Fixture for Biological Tissue Training on the Lübecker Toolbox

Sami Beirami; Nazila Esmaeili, Jannis Hagenah

DOI https://doi.org/10.18416/AMMM.2025.25062097

Printed Anatomy for Planning, Training, and Phantoms for Quality Assurance, 2097

3D Printing for Education and Instruction

Insights into a student-managed surgical simulation laboratory - SimLab.
SimLab - Students for Surgery

Hans Christian Schmidt; Jama Wahid, Abdulrahman Al-Harazi, Martin Oertel, Lucas Cröpelin, Florian Rapp, Hajera Khaleqi, Sarina Sczech, Atielsadat Nasr Esfahani, Kim Seifert, Julia Inhoff, Amani Nasser

DOI https://doi.org/10.18416/AMMM.2025.25062090

3D Printing for Education and Instruction, 2090