Vol. 8 No. S1 (2026): Trans. AMMM Supplement | Transactions on Additive Manufacturing Meets Medicine

Scientific Keynotes

Additive manufacturing of Mg alloys for degradable implants

Cecilia Persson

DOI https://doi.org/10.18416/AMMM.2026.26062776

Scientific Keynotes, 2776
Enhancing 3D bioprinting functionalities using ion-releasing bioactive glass nanoparticle-containing bioinks

Aldo Boccaccini

DOI https://doi.org/10.18416/AMMM.2026.26062777

Scientific Keynotes, 2777
Microfluidics cavitation and jetting: an ultrafast inertial tool for bioengineering and medicine at the mesoscale

David Fernandez Rivas

DOI https://doi.org/10.18416/AMMM.2026.26062775

Scientific Keynotes, 2775
Digital convergence: multi-material phantoms for the validation of surgical micro-robotics

Jack B. Stubbs

DOI https://doi.org/10.18416/AMMM.2026.26062778%20

Scientific Keynotes, 2778

Industrial Keynotes

The future of build preparation and parameter development for LPBF: How can model based engineering boost part quality?

Christoph Wangenheim

DOI https://doi.org/10.18416/AMMM.2026.26063078

Industrial Keynotes, 3078
From individualization to industrialization – via 3D printed implants

Davy Orye

DOI https://doi.org/10.18416/AMMM.2026.26063077

Industrial Keynotes, 3077
From segmentation to 3D insight

Einar Heiberg Brandt

DOI https://doi.org/10.18416/AMMM.2026.26062855

Industrial Keynotes, 2855
AM of NiTi for medical applications

Jannis Lemke; Alberto Coda

DOI https://doi.org/10.18416/AMMM.2026.26062941

Industrial Keynotes, 2941

Additive Manufacturing of Electrically Active Implants

3D-printing of an electroactive niobate-based ceramic for potential bone-tissue regeneration: Fabrication and piezoelectric response

Yasamin Pesaran Afsharian, Christian Polley, Hermann Seitz

DOI https://doi.org/10.18416/AMMM.2026.26062764

Additive Manufacturing of Electrically Active Implants, 2764
Biomechanical testing of an additively manufactured implant for mandibular reconstruction

Yunis Knorre; Michael Dau, Laura Lembcke, Wiebke Radlof, Christopher Benz, Christian Polley, Hermann Seitz, Lars Radtke

DOI https://doi.org/10.18416/AMMM.2026.26062756

Additive Manufacturing of Electrically Active Implants, 2756
Development and characterization of cpfs synthesized titanium hydroxyapatite composite scaffolds fabricated by 3d printing for biomedical applications

Aneela Anwar; Sadaf Ameen

DOI https://doi.org/10.18416/AMMM.2026.26062733

Additive Manufacturing of Electrically Active Implants, 2733
Fiber-Reinforced Hydrogel Constructs Based on Melt Electrowritten Scaffolds for Osteochondral Tissue Engineering

Carla Maximiliane Niendorf, Phillip Barkow, Janine Waletzko-Hellwig, Vivica Freiin Grote, Christian Polley, Hannah Kissel, Aldo Roberto Boccaccini, Rainer Bader, Hermann Seitz

DOI https://doi.org/10.18416/AMMM.2026.26062746

Additive Manufacturing of Electrically Active Implants, 2746
Automated Analysis of Cell Motility on Structured Surfaces

Wiebke Wollenberg, Malte Bruhn, Henrike Rebl, Susanne Staehlke, Laura Cooper, Berit Zeller-Plumhoff

DOI https://doi.org/10.18416/AMMM.2026.26062762

Additive Manufacturing of Electrically Active Implants, 2762
Influence of cell size on the mechanical and fatigue behavior of EBM-manufactured Ti-6Al-4V gyroid structures for revision hip implants

Wiebke Radlof, Vanessa Neumann, Yunis Knorre, Christian Polley, Hermann Seitz, Lars Radtke

DOI https://doi.org/10.18416/AMMM.2026.26062768

Additive Manufacturing of Electrically Active Implants, 2768

Scaffolds, Implants and Drug Delivery Systems

Translating Additively Manufactured Medicinal Products Into Clinical Applications

Martina Knabel, Marleen Grzybowski, Annika Buchholz, Thomas Lenarz, Verena Scheper

DOI https://doi.org/10.18416/AMMM.2026.26062739

Scaffolds, Implants and Drug Delivery Systems, 2739
A biomechanical testing framework for additively manufactured trauma implants by replicating fractures under multiaxial loading

Sakthi Kiruthikka Muthukrishnan, Matthias Münch, Lina Maria Behrends, Aaron Hönig, Arndt-Peter Schulz

DOI https://doi.org/10.18416/AMMM.2026.26062738

Scaffolds, Implants and Drug Delivery Systems, 2738

Material Properties, Structural Designs, and Printing Technologies

The effect of thermal cycles on the mechanical longevity of selectively laser melted metallic implants

Snehashis Pal; Tomaž Brajlih, Nenad Gubeljak, Igor Drstvenšek

DOI https://doi.org/10.18416/AMMM.2026.26062977

Material Properties, Structural Designs, and Printing Technologies, 2977
Development of parameterized unit cells for the elasticity modulation of 3D-printed midsoles

Thomas Friedrich; Lea Peuckert, Franziska Seidensticker, Lea Evers, Thorsten M. Buzug

DOI https://doi.org/10.18416/AMMM.2026.26062743

Material Properties, Structural Designs, and Printing Technologies, 2743
A novel single-step manufacturing platform for patient-specific PEEK implants via FFF and in situ plasma biofunctionalization

Jay Phruekthayanon, Marina Kühn-Kauffeldt, Marvin Kühn

DOI https://doi.org/10.18416/AMMM.2026.26062718

Material Properties, Structural Designs, and Printing Technologies, 2718
Sinter-based AM technologies – New opportunities for medical technology

Thomas Studnitzky

DOI https://doi.org/10.18416/AMMM.2026.26062779

Material Properties, Structural Designs, and Printing Technologies, 2779
Integration of cellulose nanofibers in the formulation of PLA/HAp filaments: an alternative to their application as ECM

Guadalupe Estrella Guisado, José Manuel Luque López, Ana Ferrández Montero, Lucía Gallego , Begoña Ferrari Fernández, Zoilo González Granados

DOI https://doi.org/10.18416/AMMM.2026.26062730

Material Properties, Structural Designs, and Printing Technologies, 2730
Microstructural and corrosion characterization of dual alpha(Mg) + beta(Li) phase Mg-Li-Ca alloy produced by PBF-LB

Aleksandra Zielińska, Anna Dobkowska, Francesco D’Elia, Črtomir Donik, Matjaž Godec, Wojciech Święszkowski

DOI https://doi.org/10.18416/AMMM.2026.26062782

Material Properties, Structural Designs, and Printing Technologies, 2782
Design and evaluation of a paste applicator for laser tissue soldering

Carl Gathmann; Martin Rolfs, Oscar Cipolato

DOI https://doi.org/10.18416/AMMM.2026.26062734

Material Properties, Structural Designs, and Printing Technologies, 2734
Development of a biomimetic atherosclerosis phantom using 3D-printing

Annika C. Dell, Miriam Reck, Thomas Friedrich, André Behrends, Thorsten M. Buzug

DOI https://doi.org/10.18416/AMMM.2026.26062754%20

Material Properties, Structural Designs, and Printing Technologies, 2754
Pneumatically assisted gerotor pump system for high-volume bioprinting of viscous hydrogels

André Behrends, Dennis Wendt, Lea Evers, Thorsten Buzug

DOI https://doi.org/10.18416/AMMM.2026.26062766

Material Properties, Structural Designs, and Printing Technologies, 2766
Study of the biological activity of laser powder bed fusion Zn-1Mg and Zn-1Mg-1Ag (wt.%) intended for cardiovascular stenting applications

Marlene Aydee González García; Anna Dobkowska, Eva Jablonská, Ondřej Strnad, Jiři Kubásek, Wojciech Święszkowski

DOI https://doi.org/10.18416/AMMM.2026.26062771

Material Properties, Structural Designs, and Printing Technologies, 2771
Impact of lattice-based Voronoi design and surface finishing on the functional performance of Ti-6Al-4V bone screws

Maddalena Bracchi; Clara Mapelli, Jacopo Fiocchi, Ausonio Tuissi, Chiara Colombo, Carlo Alberto Biffi

DOI https://doi.org/10.18416/AMMM.2026.26062732

Material Properties, Structural Designs, and Printing Technologies, 2732

Printed Anatomy for Planning, Training, and Phantoms for Quality Assurance

Arterial deformation evaluation during endovascular procedures using 3D-printed aortic aneurysm models: a pilot study

Marie Julien; Alexandre Oliny, Lucie Derycke, Abdul Barakat, Stephan Haulon

DOI https://doi.org/10.18416/AMMM.2026.26062729

Printed Anatomy for Planning, Training, and Phantoms for Quality Assurance, 2729
Additively Manufactured Bone Surrogates for Reproducing Screw Insertion Behavior in Cadaveric Bone

Mathis Hach, Aila Klostermann, Moritz Lukas Königer, Berit Zeller-Plumhoff, Thomas Mittlmeier, Philipp Weißgraeber

DOI https://doi.org/10.18416/AMMM.2026.26062736

Printed Anatomy for Planning, Training, and Phantoms for Quality Assurance, 2736
Design and material characterization of cost-effective 3D-printed tissue-equivalent phantoms for radiotherapy quality assurance

Emmanuel Uwitonze, Carlotta Mozzi, Rossana Lanzillotta, Michele Avanzo, Sandro Bianucci, Daniele Cortis, Francesca Lizzi, Lorenzo Marini, Livia Marrazzo, Donato Orlandi, Stefania Pallotta, Giovanni Pirrone, Alessandra Retico, Danilo Tatananni, Cinzia Talamonti, Aafke Kraan

DOI https://doi.org/10.18416/AMMM.2026.26062741

Printed Anatomy for Planning, Training, and Phantoms for Quality Assurance, 2741
A 3D printed anthropomorphic MRI phantom using contrast matched silicone–silicone oil–gelatin inks

Donghuan Yang, Dominic Williams, Stephen Edmondson, Brian Derby

DOI https://doi.org/10.18416/AMMM.2026.26062772

Printed Anatomy for Planning, Training, and Phantoms for Quality Assurance, 2772
Embedded microchannel arrays for contrast agent transport in silicone MRI phantoms

Dominic Williams; Donghuan Yang, Ben Leverton, Ross Little, Ben Dickie, Brian Derby

DOI https://doi.org/10.18416/AMMM.2026.26062765

Printed Anatomy for Planning, Training, and Phantoms for Quality Assurance, 2765
X-Ray-free neuroendovascular training using optically-tracked 3D-printed phantoms

Roman Leonov; Sonja Wichelmann, André Behrends, Thomas Friedrich, Thorsten Buzug

DOI https://doi.org/10.18416/AMMM.2026.26062720

Printed Anatomy for Planning, Training, and Phantoms for Quality Assurance, 2720
Phantom-based Training of Real-Time Instrument Tracking and Navigation for Neurosurgical Applications

Alexandra Eberenz, Lea Evers, Daniel Schetelig, Matteo Mario Bonsanto, Jessica Kren, Marius Krusen, Dennis Kundrat

DOI https://doi.org/10.18416/AMMM.2026.26062728%20

Printed Anatomy for Planning, Training, and Phantoms for Quality Assurance, 2728

3D Printing for Education and Instruction

Development of dynamic heart and coronary artery models to train anastomoses for cardiac surgery

Kendra Hemken, Roman Leonov , Nina Sophie Pommert, Barbara Linz, Annika Dell, Thomas Pühler, Dennis Kundrat

DOI https://doi.org/10.18416/AMMM.2026.26062726

3D Printing for Education and Instruction, 2726
Dual-concentration PVA hydrogel brain phantom for neurosurgical training

Lea Evers, Franziska Seidensticker, Lukas Friedrich Evers, Thomas Friedrich, André Behrends, Georg Männel, Steffen Buschschlüter, Daniel Schetelig, Matteo Mario Bonsanto, Jessica Kren, Eric Aderhold, Dennis Kundrat, Thorsten M. Buzug

DOI https://doi.org/10.18416/AMMM.2026.26062742

3D Printing for Education and Instruction, 2742

Transactions on Additive Manufacturing Meets Medicine

Scientific Keynotes

Industrial Keynotes

Additive Manufacturing of Electrically Active Implants

Individualized Medicine for Oral Applications

Medical Aids and Devices

Imaging and Modelling in 3D Printing

Scaffolds, Implants and Drug Delivery Systems

Material Properties, Structural Designs, and Printing Technologies

Printed Anatomy for Planning, Training, and Phantoms for Quality Assurance

3D Printing for Education and Instruction