Vol. 2 No. 1 (2020): Trans. AMMM | Transactions on Additive Manufacturing Meets Medicine

Transactions on Additive Manufacturing Meets Medicine

www.journals.infinite-science.de/ammm

Vol. 2 No. 1 (2020): Trans. AMMM

DOI: https://doi.org/10.18416/AMMM.2020.2009000

Anti-Corona Aids and Devices

3D Printing for COVID pandemic response: laryngoscopes, ventilators, and beyond

Leonid Chepelev, Olivier Miguel, Adnan Sheikh

DOI https://doi.org/10.18416/AMMM.2020.2009001
Novel design and development process for 3D printed personal protective equipment against COVID-19

Michael Schmidt, Jesse Roitenberg, Robert Sims, J. Inziell, F. Lobo Fenoglietto, Jack Stubbs

DOI https://doi.org/10.18416/AMMM.2020.2009002
Use of AM technologies to face the Covid-19 emergency
Workflow and practical examples

Stefania Marconi, Gianluca Alaimo, Valeria Mauri, Erika Negrello, Alberto Cattenone, Andrea Pietrabissa, Ferdinando Auricchio

DOI https://doi.org/10.18416/AMMM.2020.2009003
Ramping-up 3D-printed corona devices – additive manufacturing opposing injection moulding

Thomas Lück, Christian Seifarth, Peter Malauschek, Olav Schendel, Hans Nopper

DOI https://doi.org/10.18416/AMMM.2020.2009004
Implementation of Design for Additive Manufacturing in rapid product development.

Juan Schutte, Olaf Diegel, Arno Ferreira

DOI https://doi.org/10.18416/AMMM.2020.2009005
3D printing workflows for printing individualized personal protective equipment: an overview

Matteo Meglioli, Andrea Toffoli, Guido Maria Macaluso, Sylvain Catros

DOI https://doi.org/10.18416/AMMM.2020.2009006
Design of 3D-printable nasopharyngeal swabs in Matlab for COVID-19 testing

Yilun Sun, Alexandra Mercader, Tim C. Lueth

DOI https://doi.org/10.18416/AMMM.2020.2009007
3D printing of frames for anti-coronavirus face shields using different processes and materials

Erik Westphal, Robert Mau, Tim Dreier, Hermann Seitz

DOI https://doi.org/10.18416/AMMM.2020.2009008

Material Properties, Structural Designs, and Printing Technologies

Structural static characterization of a novel 3D printed prosthetic foot

Fabian Porras, Miguel Araya, Olga Sánchez, Roberto Vargas, Sebastián Corrales

DOI https://doi.org/10.18416/AMMM.2020.2009009
3D Additive manufacturing of shapeshifting scaffolds: polymeric and ceramic solutions

Darius Gailevicius, Greta Merkininkaite, Dovile Andrijec, Deividas Andriukaitis, Henrikas Gricius, Rokas Vargalis, Linas Jonusauskas, Simas Šakirzanovas

DOI https://doi.org/10.18416/AMMM.2020.2009010
Dimensional characteristics of FDM 3D printed PEEK implant for craniofacial reconstructions

Neha Sharma, Philipp Honigmann, Shuaishuai Cao, Florian Thieringer

DOI https://doi.org/10.18416/AMMM.2020.2009011
Mechanical performance of electronically functional smart textiles

Youssif Merhi, Peter H. Mikkelsen, Charlotte Suetta, Jens V. Nygaard, Shweta Agarwala

DOI https://doi.org/10.18416/AMMM.2020.2009012
Digital design and fabrication of controlled porosity, personalized lower limb AFO splints

Mazher Mohammed, Frank Elmo

DOI https://doi.org/10.18416/AMMM.2020.2009013
Surface processing of Additively Manufactured articles for the improvement of antimicrobial properties

Konstantin Rybalcenko, Christian Folgar, Ioannis Anastasopoulos, Giorgio Ioannides, Luis Folgar

DOI https://doi.org/10.18416/AMMM.2020.2009014
Sensors integration in additive DMLS metal parts

Giorgio De Pasquale, Alberto Buffon, Lorenzo Bongiorni

DOI https://doi.org/10.18416/AMMM.2020.2009015
3D selective laser glass etching for medical applications

Agne Butkute, Tomas Baravykas, Titas Tičkūnas, Linas Jonušauskas, Valdas Sirutkaitis

DOI https://doi.org/10.18416/AMMM.2020.2009016

Scaffolds, Implants and Drug Delivery Systems

Dimensional consistency of SLM printed orthopaedic implants designed using lightweight structures

Lina Yan, Li Ping Zhao, Gavin Kane O'Neill

DOI https://doi.org/10.18416/AMMM.2020.2009017
Mechanical performances of lightweight structures for orthopaedic implants

Lina Yan, Gavin K. O'Neill

DOI https://doi.org/10.18416/AMMM.2020.2009018
Sintering behavior of 3D printed barium titanate composite scaffolds for bone repair

Christian Polley, Sebastian Schulze, Thomas Distler, Rainer Detsch, Aldo R. Boccaccini, Hermann Seitz

DOI https://doi.org/10.18416/AMMM.2020.2009019
Polydopamine functionalized 3D printed scaffolds for bone tissue engineering

Jaidev Chakka, Noah Laird, Timothy Acri, Satheesh Elangovan, Aliasger Salem

DOI https://doi.org/10.18416/AMMM.2020.2009020
PEGDA drug delivery scaffolds manufactured with a novel hybrid AM process

Natalia Rekowska, Jan Konasch, Alexander Reiss, Robert Mau, Thomas Eickner, Hermann Seitz, Niels Grabow, Michael Teske

DOI https://doi.org/10.18416/AMMM.2020.2009021
Strategies to evaluate alginate based bioinks applying extrusion printing for biofabrication

Emine Karakya, Lena Fischer, Jonas Hazur, Aldo R. Boccaccini, Ingo Thievessen, Rainer Detsch

DOI https://doi.org/10.18416/AMMM.2020.2009022
Novel co-axial extrusion printing head for tissue engineering

Jiong Yang, Paulo Bartolo

DOI https://doi.org/10.18416/AMMM.2020.2009023

Printed Anatomy for Planning, Training, Education, and Phantoms for Quality Assurance

3D-printing of elastic stenosis phantoms

Thomas Friedrich, Franz Wegner, Thorsten Buzug

DOI https://doi.org/10.18416/AMMM.2020.2009024
Determination of the critical closing pressure for a 3D printed collapsible model of an idealized upper airway geometry

Alina Ibbeken, Christina Hagen, Fenja Zell, Armin Steffen, Ulrike Grzyska, Alex Frydrychowicz, Thorsten M. Buzug

DOI https://doi.org/10.18416/AMMM.2020.2009025
Exploring realistic haptics for 3D-printed organ phantoms in surgery training in VR and AR

Thomas Lück, Hans Nopper, Olav Schendel, Dirk Weyhe, Daniela Salzmann, Verena Uslar, Anke V. Reinschluessel, Tanja Döring, Thomas Muender, Rainer Malaka, Andrea Schenk, Christian Schumann

DOI https://doi.org/10.18416/AMMM.2020.2009026
Additively manufactured anatomical heart model for performance evaluation of aortic valve implants

Juliane Kuhl, Pablo Daniel Mendoza Ponce, Wolfgang Krautschneider, Dieter Krause

DOI https://doi.org/10.18416/AMMM.2020.2009027
Comparing Technologies of Additive Manufacturing for the Development of Modular Dosimetry Phantoms in Radiation Therapy

Marie Wegner, Johanna Spallek, Dieter Krause, Elisabetta Gargioni

DOI https://doi.org/10.18416/AMMM.2020.2009028

Medical Aids and Devices

Biomechanical analysis of a novel external fixator with finite element method

Mohammed Alqahtani, Paulo Bartolo

DOI https://doi.org/10.18416/AMMM.2020.2009029
3D laser microfabrication of medical devices

Linas Jonusauskas, Tomas Baravykas, Agnė Butkutė, Deividas Andriukaitis, Henrikas Gricius, Titas Tiškūnas, Dovile Andrijec

DOI https://doi.org/10.18416/AMMM.2020.2009030
Comparing pediatric airway variability to standard laryngoscope sizes for 3D printing patient specific blades.

Madelene Habib, Robert Sims, J. Inziell, F. Lobo Fenoglietto, Jack Stubbs

DOI https://doi.org/10.18416/AMMM.2020.2009031
Using 3D printing to implement a hyperthermia insert for a preclinical MPI scanner

Huimin Wei, Andre Behrends, Thomas Friedrich, Thorsten Buzug

DOI https://doi.org/10.18416/AMMM.2020.2009032

Imaging and Modelling in 3D Printing

Application-specific software supporting engineers and physicians to manage risks in 3DP

Martin Herzmann, Stefan Leonhardt

DOI https://doi.org/10.18416/AMMM.2020.2009033
Metrology of additively manufactured lattice structures by X-ray tomography

Anton du Plessis, Neil Campbell

DOI https://doi.org/10.18416/AMMM.2020.2009034