Vol. 5 No. S1 (2023): Trans. AMMM Supplement | Transactions on Additive Manufacturing Meets Medicine

Scientific Keynotes

X-ray computed tomography for additive manufacturing: improved non-destructive evaluation using deep learning

Anton du Plessis

DOI https://doi.org/10.18416/AMMM.2023.23091144

Scientific Keynotes, 1144
Advancing regenerative medicine: biogenic hydroxyapatite and glass ceramics based on it for medical 3D printing

Olena Sych

DOI https://doi.org/10.18416/AMMM.2023.23091145

Scientific Keynotes, 1145

Industrial Keynotes

3D multiphoton polymerization meets stereolithography – towards bioprinting

Linas Jonušauskas, Dovilė Andrijec, Konradas Stonkus

DOI https://doi.org/10.18416/AMMM.2023.2309805

Industrial Keynotes, 805
3D printed microelectronics & new design thinking

Rafael Del Rey

DOI https://doi.org/10.18416/AMMM.2023.23091149

Industrial Keynotes, 1149
The Promise of 3D-Printed Implants
Arburg Plastic Freeforming with medical certified materials

Martin Neff, Sascha Petereit

DOI https://doi.org/10.18416/AMMM.2023.23091136

Industrial Keynotes, 1136
Development of materials for additively manufactured hybrid knee implants

Markus Weinmann, Melanie Stenzel, Jan Johannsen, Jan-Oliver Saß, Marie-Luise Sellin, Cornelia Lorck, Dirk Pfützner, Ulrich Lembke, Daniel Kluess, Rainer Bader

DOI https://doi.org/10.18416/AMMM.2023.2309823

Industrial Keynotes, 823
Hybrid manufacturing of medical implants

Friedemann Lell, Florian Feucht, Alberto Gotti

DOI https://doi.org/10.18416/AMMM.2023.2309835

Industrial Keynotes, 835

Medical Aids and Devices

Development of fat-holding and drug-eluting implant for breast-conserving surgery

Chak Hin Tam, Prof. Sheng Qi

DOI https://doi.org/10.18416/AMMM.2023.23091133

Medical Aids and Devices, 1133
TPMS structures delay clotting in extracorporeal blood contactors

Lukas Hirschwald, Franziska Hagemann, Maik Biermann, Patrick Hoffmann, Tim Höhs, Florian Neuhaus, Märthe Tillmann, Petar Peric, Maximilian Wattenberg, Maik Stille, Tamara Fechter, Alexander Theißen, Patrick Winnersbach, Kai Barbian, Sebastian Jansen, Bettina Wiegmann, Matthias Wessling, Christian Bleilevens, John Linkhorst

DOI https://doi.org/10.18416/AMMM.2023.2309817

Medical Aids and Devices, 817
The Role of Unit Cell Geometry on Biocompatibility of Beta-Ti Lattice Scaffolds

Melika Babaei, Lorena Emanuelli, Raffaele De Biasi, Andrea Trivisonno, Giovanna Dall'amico, Fausto Riva, Matteo Benedetti, Massimo Pellizzari

DOI https://doi.org/10.18416/AMMM.2023.2309782

Medical Aids and Devices, 782

Imaging and Modelling in 3D Printing

Physical model of a medical device component

Eric Aderhold, Thomas Friedrich, Matthias Graeser

DOI https://doi.org/10.18416/AMMM.2023.23091125

Imaging and Modelling in 3D Printing, 1125
Integration of 3D printing and gamified didactics in medical imaging education

Christian Hanshans, Melanie Rammler

DOI https://doi.org/10.18416/AMMM.2023.23091127

Imaging and Modelling in 3D Printing, 1127
How Micro-CT improves the printing process of AM components

Katharina Bliedtner, Polina Dedyaeva, Frank Herold

DOI https://doi.org/10.18416/AMMM.2023.2309819

Imaging and Modelling in 3D Printing, 819

Scaffolds, Implants and Drug Delivery Systems

Fabrication of biodegradable tailor-made bone cartilage implants by TPA

Vincent Mair, Jonas Wiedenmann, Klaus Liefeith, Michaela Noll, Claudia Ortmann, Katrin Susanne Lips, Benedikt Stender

DOI https://doi.org/10.18416/AMMM.2023.2309812

Scaffolds, Implants and Drug Delivery Systems, 812
Design and additive manufacturing of biodegradable patient-specific implants for bone regeneration

Marie-Luise Wille, Sinduja Suresh, Buddhi Herath, Markus Laubach, Dietmar Hutmacher

DOI https://doi.org/10.18416/AMMM.2023.2309809

Scaffolds, Implants and Drug Delivery Systems, 809
Development of a biodegradable patient-individualized drug delivery round window niche implant (RNI) for inner ear therapy

Yanjing Luo, Thomas Lenarz, Farnarz Matin-Mann, Cornelia Blume, Verena Scheper

DOI https://doi.org/10.18416/AMMM.2023.2309829

Scaffolds, Implants and Drug Delivery Systems, 829
Additive manufacturing of a miniaturized ceramic implant for animal studies on the treatment Alzheimer’s disease

Philip Töllner, Jacqueline Hofrichter, Horst Krüsemann, Benjamin Jenßen, Hermann Seitz

DOI https://doi.org/10.18416/AMMM.2023.2309791

Scaffolds, Implants and Drug Delivery Systems, 791
Inkjet printing of poly(ethylene glycol) diacrylate for a hybrid 3D printing process

Ahmed Sannan, Robert Mau, Thomas Eickner, Michael Teske, Niels Grabow, Hermann Seitz

DOI https://doi.org/10.18416/AMMM.2023.2309799

Scaffolds, Implants and Drug Delivery Systems, 799
Endothelial monolayer formation on melt electro-written scaffolds under dynamic conditions to mimic tunica interna

Sebastian Loewner, Sebastian Heene, Fabian Cholewa, Henrik Heymann, Holger Blume, Cornelia Blume

DOI https://doi.org/10.18416/AMMM.2023.2309802

Scaffolds, Implants and Drug Delivery Systems, 802
Printing magnetically driven micro-helices using two-photon polymerization

Lukas Schmidt-Russnak, Justin Ackers, Ankit Malhotra, Anna Christin Bakenecker, Matthias Gräser

DOI https://doi.org/10.18416/AMMM.2023.23091130

Scaffolds, Implants and Drug Delivery Systems, 1130
Piezoelectric and bioactive composites: Functional materials for bone tissue engineering

Christian Polley, Thomas Distler, Rainer Detsch, Aldo R. Boccaccini, Hermann Seitz

DOI https://doi.org/10.18416/AMMM.2023.2309800

Scaffolds, Implants and Drug Delivery Systems, 800
Development of a 3D-printed round window niche implant for controlled cochlear pharmacotherapy

Chunjiang Wei, Ziwen Gao, Thomas Eickner, Norman Maggi, Martin Ulbricht, Anne Seidlitz, Thomas Lenarz, Verena Scheper

DOI https://doi.org/10.18416/AMMM.2023.2309779

Scaffolds, Implants and Drug Delivery Systems, 779

Material Properties, Structural Designs, and Printing Technologies

A patient-matched additively manufactured implant for treatment of thumb amputations: biomechanical analysis and cadaver study

Chiara Bregoli, Jacopo Fiocchi, Carlo Alberto Biffi, Kavin Morellato, Federico Stacchiotti, Rubens Ferrari, Mario Lando, Roberto Adani, Priscilla Di Sette, Michele Rampoldi, Emanuele Gruppioni, Ausonio Tuissi

DOI https://doi.org/10.18416/AMMM.2023.2309818

Material Properties, Structural Designs, and Printing Technologies, 818
Characterising material properties for fused filament fabrication of spinal orthoses

Rachel Chalmers, Sinduja Suresh, Marie-Luise Wille, J. Paige Little

DOI https://doi.org/10.18416/AMMM.2023.2309785

Material Properties, Structural Designs, and Printing Technologies, 785
Individualised additive pickup coils

Pascal Stagge, Maximilian Wattenberg, Matthias Gräser

DOI https://doi.org/10.18416/AMMM.2023.23091129

Material Properties, Structural Designs, and Printing Technologies, 1129
Functional performance of NiTi shape memory architected structures produced by laser powder bed fusion (LPBF)

Carlo Alberto Biffi, Celal Soyarslan, Jacopo Fiocchi, Chiara Bregoli, Ausonio Tuissi, Mehrshad Mehrpouya

DOI https://doi.org/10.18416/AMMM.2023.2309821

Material Properties, Structural Designs, and Printing Technologies, 821
Designing 3D printed ceramic lattice structures for osseointegrative implants

Erik Kornfellner, Stefan Reininger, Stefan Scheiner, Francesco Moscato

DOI https://doi.org/10.18416/AMMM.2023.2309781

Material Properties, Structural Designs, and Printing Technologies, 781
Concept for a new 3D printing technique for multiple unit particle systems

Lee Roy Oldfield, Anne Seidlitz, Tobias Auel

DOI https://doi.org/10.18416/AMMM.2023.2309813

Material Properties, Structural Designs, and Printing Technologies, 813
A hyperthermia insert for a preclinical MPI scanner incorporating auxiliary devices

André Behrends, Alexander Neumann, Huimin Wei, Thomas Friedrich, Thorsten Buzug

DOI https://doi.org/10.18416/AMMM.2023.2309826

Material Properties, Structural Designs, and Printing Technologies, 826
Beta titanium novel porous hip implant design for stress shielding reduction

Raffaele De Biasi, Lorena Emanuelli, Melika Babaei, Sara Azevedo, Andrea Trivisonno, Giovanna Dall'amico, Fausto Riva, Matteo Benedetti, Massimo Pellizzari

DOI https://doi.org/10.18416/AMMM.2023.2309789

Material Properties, Structural Designs, and Printing Technologies, 789
Adapted scanning strategies for more accurate implants manufactured by LPBF

Juliane Thielsch, Hannes Korn, Sandra Herzig, Felix Gebhardt, Stefan Holtzhausen, Peter Koch, Tobias Gustmann, Claudia Ortmann, Martin Liebelt, Welf-Guntram Drossel

DOI https://doi.org/10.18416/AMMM.2023.2309834

Material Properties, Structural Designs, and Printing Technologies, 834
Microgel support bath enabled bioprinting of 3D multimaterial structures for skin tissue engineering

Samantha Fernandes, Paulo Bartolo

DOI https://doi.org/10.18416/AMMM.2023.2309811

Material Properties, Structural Designs, and Printing Technologies, 811
Microtopography on poly-e-caprolactone and their wettability properties

Matthias Vosatek, Elettra Verin, Luis Pichelkastner, Francesco Moscato

DOI https://doi.org/10.18416/AMMM.2023.2309792

Material Properties, Structural Designs, and Printing Technologies, 792
Design and 3D printing of novel Ti spine rods with lower flexural modulus/stiffness with optimised imaging compatibility

Naresh Kumar, Jagadeesh Babu Veluru, Praveen Jeyachandran, Balamurugan A Vellayappan, James Thomas Patrick Decourcy Hallinan, Jerry Ying Shi Fuh, Senthil Kumar Anatharaman

DOI https://doi.org/10.18416/AMMM.2023.23091120

Material Properties, Structural Designs, and Printing Technologies, 1120
Wavefront measurements for parameter characterization of 3D printed cylindrical microlenses

Lena Felicitas Unger, Fabian Henk, Thomas Friedrich, Mathias Beyerlein, Kai Seger

DOI https://doi.org/10.18416/AMMM.2023.23091128

Material Properties, Structural Designs, and Printing Technologies, 1128
Mechanical and metrological characterization of two different porous beta titanium cellular structures made by laser powder bed fusion

Lorena Emanuelli, Raffaele De Biasi, Melika Babaei, Anton du Plessis, Andrea Trivisonno, Giovanna Dall'Amico, Fausto Riva, Matteo Benedetti, Massimo Pellizzari

DOI https://doi.org/10.18416/AMMM.2023.2309790

Material Properties, Structural Designs, and Printing Technologies, 790
Compression set of 3D-printed parts

Roman Leonov, Annika Dell, Thomas Friedrich

DOI https://doi.org/10.18416/AMMM.2023.2309796

Material Properties, Structural Designs, and Printing Technologies, 796
3D Printing of granular biocomposites

Francesca Bono, Lorenzo Lucherini , Matteo Hirsch, Eva Baur, Esther Amstad

DOI https://doi.org/10.18416/AMMM.2023.2309843

Material Properties, Structural Designs, and Printing Technologies, 843

Printed Anatomy for Planning, Training, Education, and Phantoms for Quality Assurance

First 3D printed radioactive 89Zr phantoms for Positron Emission Tomography

Ezzat Elmoujarkach, Steven Seeger , Christian Schmidt , Julia G. Mannheim , Fabian P. Schmidt , Magdalena Rafecas

DOI https://doi.org/10.18416/AMMM.2023.2309833

Printed Anatomy for Planning, Training, Education, and Phantoms for Quality Assurance, 833
Graspable human embryonic development with 3D-printed educational models

Hans Nopper, Thomas Lück , Ubiratan Santos Freitas, Peter Malauschek, Andreas Lingner, Jaco Hagoort, Bernadette S. de Bakker

DOI https://doi.org/10.18416/AMMM.2023.2309794

Printed Anatomy for Planning, Training, Education, and Phantoms for Quality Assurance, 794

Bioelectronic Applications

Ultra-precise deposition: additive manufacturing process for next-generation electronics

Kamelia Duczmal, Piotr Kowalczewski, Łukasz Witczak, Jolanta Gadzalińska, Iwona Grądzka-Kurzaj, Mateusz Łysień, Ludovic Schneider, Aneta Wiatrowska, Karolina Fiączyk, Łukasz Kosior, Filip Granek

DOI https://doi.org/10.18416/AMMM.2023.2309832

Bioelectronic Applications, 832

In-Situ 3D Printing

Pitfalls and prospect in the treatment with patient-specific implants: An oral and maxillofacial surgeons perspective

Philippe Korn, Tarek Omar Pacha, Andreas Kampmann, Annika Raatz, Nils-Claudius Gellrich

DOI https://doi.org/10.18416/AMMM.2023.2309825

In-Situ 3D Printing, 825
Intra-operative individualized implant manufacturing and positioning using in situ 3D printing - Illusion or reality?

Janin Reifenrath, Marco Haertle, Henning Windhagen

DOI https://doi.org/10.18416/AMMM.2023.23091122

In-Situ 3D Printing, 1122
Microdispenser 3D Printing

Laura Fütterer, Ejvind Olsen, Ludger Overmeyer, Gerrit Hohenhoff, Stefan Kaierle, Theodor Doll, Philipp-Cornelius Pott

DOI https://doi.org/10.18416/AMMM.2023.2309844

In-Situ 3D Printing, 844
Digital workflows in dentistry and in dental implantology

Philipp-Cornelius Pott, Theodor Doll, Meike Stiesch

DOI https://doi.org/10.18416/AMMM.2023.2309842

In-Situ 3D Printing, 842
Holistically tailored implants: Interactions between additively manufactured metallic implants and bio-printed tissue

Ronja Scholz, Nils Wegner, Jochen Tenkamp, Frank Walther

DOI https://doi.org/10.18416/AMMM.2023.2309840

In-Situ 3D Printing, 840
3D-printed silk fibroin as a resorbable biomaterial in wound healing

Sandra Fuest, Alexander Kopp, Audrey Laure Céline Grust, Jan Strenge, Martin Gosau, Ralf Smeets

DOI https://doi.org/10.18416/AMMM.2023.2309820

In-Situ 3D Printing, 820
Patient-individualized drug-delivering implants in otorhinolaryngology

Verena Scheper, Thomas Lenarz

DOI https://doi.org/10.18416/AMMM.2023.2309828

In-Situ 3D Printing, 828

3D Printed Anatomical Models

3D-printed anatomical models for robotic surgery training exercises

Annika Dell, Freschta Malekzada, Jannis Hagenah, Georg Männel, Thomas Friedrich, Michael Thomaschewski, Thorsten Buzug, Tobias Keck

DOI https://doi.org/10.18416/AMMM.2023.2309836

3D Printed Anatomical Models, 836
A facile hydrogel system for perfect multimodal imaging and surgery practice

Leonard Siebert, Haoyi Qiu, Rainer Adelung

DOI https://doi.org/10.18416/AMMM.2023.2309807

3D Printed Anatomical Models, 807
Additively manufactured model of biceps brachii for electrophysiology visualization

Andra Oltmann, Eric Aderhold, Thomas Friedrich, Philipp Rostalski

DOI https://doi.org/10.18416/AMMM.2023.23091124

3D Printed Anatomical Models, 1124
Milisecond Magnetic Particle Imaging of a 3D printed patient-specific cerebral aneurysm phantom with flow diverter stent

Olaf Kosch, Augusto F. Sanches, Yigit Özpeynirci, Thomas Liebig, Frank Wiekhorst

DOI https://doi.org/10.18416/AMMM.2023.2309808

3D Printed Anatomical Models, 808
3D printed brain artery phantoms: current status and future perspectives

Hannes Schwenke, Thorsten Buzug, Peter Schramm

DOI https://doi.org/10.18416/AMMM.2023.23091137

3D Printed Anatomical Models, 1137

Digital Work Flow for Patient Specific Implants

Development of AI-based segmentation and anatomical reconstruction for orbital floor implants using medical image data

Lotta Röhrich, Sebastian Eilermann, Fabian Schöfer, Philipp Imgrund, Phillip Gromzig, Christian Böhm, Jan Johannsen, Anh Minh Nguyen, Arthur Seibel, Farzaneh Aavani, Sandra Fuest, Johannes Krösbacher, Linus Vari, Ingomar Kelbassa, Ralf Smeets, Oliver Niggemann

DOI https://doi.org/10.18416/AMMM.2023.2309793

Digital Work Flow for Patient Specific Implants, 793
DigiMed: Digital workflow for Additive Manufacturing of patient-specific implants

Phillip Gromzig, Christian Böhm, Philipp Imgrund, Jan Johannsen, Ingomar Kelbassa, Peter Lindecke, Anh Minh Nguyen, Lotta Röhrich, Arthur Seibel, Tim Wischeropp, Loris Wulff, Farzaneh Aavani, Sandra Fuest, Johannes Krösbacher, Ralf Smeets, Linus Vari, Sebastian Eilermann, Oliver Niggemann

DOI https://doi.org/10.18416/AMMM.2023.2309841

Digital Work Flow for Patient Specific Implants, 841
Development of an adaptive L-PBF and automated post-processing work flow for PSI

Christian Böhm, Jan Walter, Jan Johannsen, Phillip Gromzig, Sandra Fuest, Philipp Imgrund, Ralf Smeets, Oliver Niggemann

DOI https://doi.org/10.18416/AMMM.2023.2309801

Digital Work Flow for Patient Specific Implants, 801
AI-based 3D-printing strategies for patient specific implants in maxillofacial surgery

Ralf Smeets, Sandra Fuest, Philipp Imgrund, Phillip Gromzig, Christian Böhm, Lotta Röhrich, Arthur Seibel, Yannick Marian Löw, Peter Lindecke, Farzaneh Aavani, Johannes Krösbacher, Linus Vari, Sebastian Eilermann, Ingomar Kelbassa, Martin Gosau, Oliver Niggemann

DOI https://doi.org/10.18416/AMMM.2023.2309815

Digital Work Flow for Patient Specific Implants, 815
Semi-automatic bone scaffold design workflow

Buddhi Herath, Markus Laubach, Sinduja Suresh, Beat Schmutz, J. Paige Little, Prasad K. D. V. Yarlagadda, Dietmar W. Hutmacher, Marie-Luise Wille

DOI https://doi.org/10.18416/AMMM.2023.2309814

Digital Work Flow for Patient Specific Implants, 814

Tutorials

Introduction into medical 3D printing - promises and limitations

Cora Lüders-Theuerkauf

DOI https://doi.org/10.18416/AMMM.2023.23091146

Tutorials, 1146
3D printed anatomical medical models

Jack Stubbs

DOI https://doi.org/10.18416/AMMM.2023.23091147

Tutorials, 1147
IP protection in medical 3D printing

Marc Wachenhausen, Thorsten Haslinde

DOI https://doi.org/10.18416/AMMM.2023.23091148

Tutorials, 1148