Journal of Additive Manufacturing Technologies

Articles

• Coordination of spatial and temporal laser beam profile towards ultra-fine feature fabrication in laser powder bed fusion

  Ali Aktas, Leonardo Caprio, Francesco Galbusera, Barbara Previtali, Ali Gokhan Demir

  DOI https://doi.org/10.18416/JAMTECH.2212687

  Articles, 687
• Post-processing of surface topography data for as-built metal additive surface texture characterization

  Theresa Buchenau, Hauke Brüning, Marc Amkreutz

  DOI https://doi.org/10.18416/JAMTECH.2212697

  Articles, 697
• Surface treatment effects on chemical milling performance of L-PBF produced Ti6Al4V ELI

  Buket Parlak, Aslinur Atakli, Oguz Acar, Emre Ozeren

  DOI https://doi.org/10.18416/JAMTECH.2212677

  Articles, 677
• A numerical and experimental investigation on buckling behavior of additively manufactured ribbed casings

  Burak Sivri, Emre Özeren, Barış Pehlivanoğulları, Ahmet Okudan, Ceren Şen, Akın Orhangül, Kübra Nur Ulukaya, Utku Ünlü

  DOI https://doi.org/10.18416/JAMTECH.2212694

  Articles, 694
• Characterization of metal powder reused multiple times for laser powder bed fusion

  Emre Ozeren, Güney Mert Bilgin, Beyzanur Ertekin, Alican Taş, Zehranur Cavcar, Muhammed Baybars Gökcan, Akın Orhangül, Göktuğ Kara

  DOI https://doi.org/10.18416/JAMTECH.2212688

  Articles, 688
• Laser weldability of laser powder bed fused AlSi7Mg0.6

  Kenan Kaan Yetil, Simone D'arcangelo, Ali Gökhan Demir, Barbara Previtali

  DOI https://doi.org/10.18416/JAMTECH.2212702

  Articles, 702
• Contact-free support structures effect on dimensional deviation of LPBF printed components with overhang features

  Orhan Gülcan, Kadir Günaydın, Alican Çelik, Evren Yasa

  DOI https://doi.org/10.18416/JAMTECH.2212686

  Articles, 686
• Energy Density Determination for L-PBFP of Ti-6Al-4V Alloy for Various Beam Diameters and Hatch Distances

  Mehmet Mollamahmutoglu, Oğuzhan Yılmaz, Cumhur Köseoğlu, Hüseyin Tecer, Fatih Özaydın, Ömer Faruk Kocaoğlu, Elif Zeynep Emir

  DOI https://doi.org/10.18416/JAMTECH.2212695

  Articles, 695
• On the mechanical behavior and microstructural characterization of wire + arc additive manufacturing of Mn-Si based steel alloy (ER70S-6)

  Masoud Abbaszade, Nevzat Bol, Özge Ece Kara, Ahmed Ali Şen, Oguzhan Yılmaz

  DOI https://doi.org/10.18416/JAMTECH.2212648

  Articles, 648
• Surface roughness assessment of post-process effects on L-PBF alloy 718

  Alican Taş, Muhammed Baybars Gökcan, Beyzanur Ertekin, Zehranur Cavcar, Emre Özeren, Güney Mert Bilgin, Göktuğ Kara, Akın Orhangül

  DOI https://doi.org/10.18416/JAMTECH.2212690

  Articles, 690